dmesg - a10-5800k with GPU overclocked to 950mhz
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.5.0-19-generic (buildd@komainu) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #30-Ubuntu SMP Tue Nov 13 17:48:01 UTC 2012 (Ubuntu 3.5.0-19.30-generic 3.5.7)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ad689fff] usable
BIOS-e820: [mem 0x00000000ad68a000-0x00000000ad969fff] reserved
BIOS-e820: [mem 0x00000000ad96a000-0x00000000adc3afff] usable
BIOS-e820: [mem 0x00000000adc3b000-0x00000000adcddfff] ACPI NVS
BIOS-e820: [mem 0x00000000adcde000-0x00000000aea4cfff] reserved
BIOS-e820: [mem 0x00000000aea4d000-0x00000000aea4dfff] usable
BIOS-e820: [mem 0x00000000aea4e000-0x00000000aec53fff] ACPI NVS
BIOS-e820: [mem 0x00000000aec54000-0x00000000af072fff] usable
BIOS-e820: [mem 0x00000000af073000-0x00000000af7f3fff] reserved
BIOS-e820: [mem 0x00000000af7f4000-0x00000000af7fffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000012fffffff] usable
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: MSI MS-7792/FM2-A75IA-E53 (MS-7792), BIOS V1.0 10/31/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000AF800000 mask FFFFFF800000 uncachable
3 base 0000B0000000 mask FFFFF0000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000130000000 aka 4864M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 2808MB, range: 8MB, type UC
reg 3, base: 2816MB, range: 256MB, type UC
total RAM covered: 2808M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 16M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 512MB, type WB
reg 2, base: 2560MB, range: 256MB, type WB
reg 3, base: 2808MB, range: 8MB, type UC
e820: update [mem 0xaf800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xaf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ffff8800000fd770]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0xaf7fffff]
[mem 0x00000000-0x7fffffff] page 1G
[mem 0x80000000-0xaf7fffff] page 2M
kernel direct mapping tables up to 0xaf7fffff @ [mem 0x1fffe000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x12fffffff]
[mem 0x100000000-0x12fffffff] page 2M
kernel direct mapping tables up to 0x12fffffff @ [mem 0xaf7fe000-0xaf7fffff]
RAMDISK: [mem 0x36298000-0x37143fff]
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 00000000adccb078 0006C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000adcd0ca8 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120320/tbfadt-579)
ACPI: DSDT 00000000adccb178 05B29 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 00000000adcd3080 00040
ACPI: APIC 00000000adcd0db8 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 00000000adcd0e30 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000adcd0e78 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 00000000adcd0eb8 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 00000000adcd0ef0 00C04 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: SSDT 00000000adcd1af8 004B7 (v02 AMD ALIB 00000001 MSFT 04000000)
ACPI: IVRS 00000000adcd1fb0 00070 (v02 AMD AMDIOMMU 00000001 AMD 00000000)
ACPI: CRAT 00000000adcd2020 002A8 (v01 AMD AGESA 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
Initmem setup node 0 [mem 0x00000000-0x12fffffff]
NODE_DATA [mem 0x12fffc000-0x12fffffff]
[ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012be00000-ffff88012f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x12fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009dfff]
node 0: [mem 0x00100000-0xad689fff]
node 0: [mem 0xad96a000-0xadc3afff]
node 0: [mem 0xaea4d000-0xaea4dfff]
node 0: [mem 0xaec54000-0xaf072fff]
node 0: [mem 0xaf7f4000-0xaf7fffff]
node 0: [mem 0x100001000-0x12fffffff]
On node 0 totalpages: 908564
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3912 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 691655 pages, LIFO batch:31
Normal zone: 3072 pages used for memmap
Normal zone: 193535 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000ad68a000 - 00000000ad96a000
PM: Registered nosave memory: 00000000adc3b000 - 00000000adcde000
PM: Registered nosave memory: 00000000adcde000 - 00000000aea4d000
PM: Registered nosave memory: 00000000aea4e000 - 00000000aec54000
PM: Registered nosave memory: 00000000af073000 - 00000000af7f4000
PM: Registered nosave memory: 00000000af800000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
PM: Registered nosave memory: 00000000fed01000 - 00000000fed40000
PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
PM: Registered nosave memory: 00000000fed45000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
PM: Registered nosave memory: 0000000100000000 - 0000000100001000
e820: [mem 0xaf800000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s83584 r8192 d22912 u524288
pcpu-alloc: s83584 r8192 d22912 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 889102
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3479540k/4980736k available (6716k kernel code, 1346480k absent, 154716k reserved, 6453k data, 928k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:16640 nr_irqs:712 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 14680064 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3792.682 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 7585.36 BogoMIPS (lpj=15170728)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
tseg: 00af800000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
ACPI: Core revision 20120320
ftrace: allocating 25133 entries in 99 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: AMD A10-5800K APU with Radeon(tm) HD Graphics stepping 01
Performance Events: AMD Family 15h PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
Booting Node 0, Processors #1 #2 #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (30341.45 BogoMIPS).
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xadc3b000-0xadcddfff] (667648 bytes)
PM: Registering ACPI NVS region [mem 0xaea4e000-0xaec53fff] (2121728 bytes)
dummy:
RTC time: 17:16:13, date: 11/23/12
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af]
pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03df]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xffffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
pci 0000:00:00.2: [1022:1419] type 00 class 0x080600
pci 0000:00:01.0: [1002:9901] type 00 class 0x030000
pci 0000:00:01.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:04.0: [1022:1414] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
pci 0000:00:10.0: reg 10: [mem 0xfeb4a000-0xfeb4bfff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330
pci 0000:00:10.1: reg 10: [mem 0xfeb48000-0xfeb49fff 64bit]
pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
pci 0000:00:11.0: reg 24: [mem 0xfeb51000-0xfeb517ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xfeb50000-0xfeb50fff]
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xfeb4f000-0xfeb4f0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xfeb4e000-0xfeb4efff]
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xfeb4d000-0xfeb4d0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xfeb4c000-0xfeb4cfff]
pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:01:00.0: reg 10: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 18: [mem 0xfea04000-0xfea04fff 64bit pref]
pci 0000:01:00.0: reg 20: [mem 0xfea00000-0xfea03fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PCI bridge to [bus 01-01]
pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0xad68a000-0xafffffff]
e820: reserve RAM buffer [mem 0xadc3b000-0xafffffff]
e820: reserve RAM buffer [mem 0xaea4e000-0xafffffff]
e820: reserve RAM buffer [mem 0xaf073000-0xafffffff]
e820: reserve RAM buffer [mem 0xaf800000-0xafffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x03af window]
pnp 00:00: [io 0x03e0-0x0cf7 window]
pnp 00:00: [io 0x03b0-0x03df window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xd0000000-0xffffffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [mem 0xe0000000-0xefffffff]
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x0010-0x001f]
pnp 00:02: [io 0x0022-0x003f]
pnp 00:02: [io 0x0063]
pnp 00:02: [io 0x0065]
pnp 00:02: [io 0x0067-0x006f]
pnp 00:02: [io 0x0072-0x007f]
pnp 00:02: [io 0x0080]
pnp 00:02: [io 0x0084-0x0086]
pnp 00:02: [io 0x0088]
pnp 00:02: [io 0x008c-0x008e]
pnp 00:02: [io 0x0090-0x009f]
pnp 00:02: [io 0x00a2-0x00bf]
pnp 00:02: [io 0x00b1]
pnp 00:02: [io 0x00e0-0x00ef]
pnp 00:02: [io 0x04d0-0x04d1]
pnp 00:02: [io 0x040b]
pnp 00:02: [io 0x04d6]
pnp 00:02: [io 0x0c00-0x0c01]
pnp 00:02: [io 0x0c14]
pnp 00:02: [io 0x0c50-0x0c51]
pnp 00:02: [io 0x0c52]
pnp 00:02: [io 0x0c6c]
pnp 00:02: [io 0x0c6f]
pnp 00:02: [io 0x0cd0-0x0cd1]
pnp 00:02: [io 0x0cd2-0x0cd3]
pnp 00:02: [io 0x0cd4-0x0cd5]
pnp 00:02: [io 0x0cd6-0x0cd7]
pnp 00:02: [io 0x0cd8-0x0cdf]
pnp 00:02: [io 0x0800-0x089f]
pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0b20-0x0b3f]
pnp 00:02: [io 0x0900-0x090f]
pnp 00:02: [io 0x0910-0x091f]
pnp 00:02: [io 0xfe00-0xfefe]
pnp 00:02: [io 0x0060-0x005f disabled]
pnp 00:02: [io 0x0064-0x0063 disabled]
pnp 00:02: [mem 0xfec00000-0xfec00fff]
pnp 00:02: [mem 0xfee00000-0xfee00fff]
pnp 00:02: [mem 0xfed80000-0xfed8ffff]
pnp 00:02: [mem 0xfed61000-0xfed70fff]
pnp 00:02: [mem 0xfec10000-0xfec10fff]
pnp 00:02: [mem 0xfed00000-0xfed00fff]
pnp 00:02: [mem 0xff000000-0xffffffff]
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x040b] has been reserved
system 00:02: [io 0x04d6] has been reserved
system 00:02: [io 0x0c00-0x0c01] has been reserved
system 00:02: [io 0x0c14] has been reserved
system 00:02: [io 0x0c50-0x0c51] has been reserved
system 00:02: [io 0x0c52] has been reserved
system 00:02: [io 0x0c6c] has been reserved
system 00:02: [io 0x0c6f] has been reserved
system 00:02: [io 0x0cd0-0x0cd1] has been reserved
system 00:02: [io 0x0cd2-0x0cd3] has been reserved
system 00:02: [io 0x0cd4-0x0cd5] has been reserved
system 00:02: [io 0x0cd6-0x0cd7] has been reserved
system 00:02: [io 0x0cd8-0x0cdf] has been reserved
system 00:02: [io 0x0800-0x089f] has been reserved
system 00:02: [io 0x0b20-0x0b3f] has been reserved
system 00:02: [io 0x0900-0x090f] has been reserved
system 00:02: [io 0x0910-0x091f] has been reserved
system 00:02: [io 0xfe00-0xfefe] has been reserved
system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:02: [mem 0xff000000-0xffffffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:03: [io 0x0600-0x060f]
pnp 00:03: [io 0x0610-0x061f]
system 00:03: [io 0x0600-0x060f] has been reserved
system 00:03: [io 0x0610-0x061f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 4]
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0081-0x0083]
pnp 00:04: [io 0x0087]
pnp 00:04: [io 0x0089-0x008b]
pnp 00:04: [io 0x008f]
pnp 00:04: [io 0x00c0-0x00df]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io 0x0070-0x0071]
pnp 00:05: [irq 8]
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0022-0x003f]
pnp 00:07: [io 0x0044-0x005f]
pnp 00:07: [io 0x0072-0x007f]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0084-0x0086]
pnp 00:07: [io 0x0088]
pnp 00:07: [io 0x008c-0x008e]
pnp 00:07: [io 0x0090-0x009f]
pnp 00:07: [io 0x00a2-0x00bf]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x04d0-0x04d1]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x00f0-0x00ff]
pnp 00:08: [irq 13]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [mem 0xb0000000-0xcfffffff]
system 00:0a: [mem 0xb0000000-0xcfffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [mem 0xfeb80000-0xfebfffff]
system 00:0b: [mem 0xfeb80000-0xfebfffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0xfed00000-0xfed003ff]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:04.0: PCI bridge to [bus 01-01]
pci 0000:00:04.0: bridge window [io 0xe000-0xefff]
pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:14.4: PCI bridge to [bus 02-02]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:02: resource 10 [mem 0xd0000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Boot video device
Freeing initrd memory: 15024k freed
PCI: CLS 64 bytes, default 64
AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40 extended features: PreF PPR GT IA
pci 0000:00:00.2: irq 40 for MSI/MSI-X
AMD-Vi: Lazy IO/TLB flushing enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa968a000-0xad689fff] (64MB) mapped at [ffff8800a968a000-ffff8800ad689fff]
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
audit: initializing netlink socket (disabled)
type=2000 audit(1353690973.424:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.19)
msgmni has been set to 6825
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:04.0: irq 41 for MSI/MSI-X
pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: irq 42 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x27 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51100 irq 42
ata2: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51180 irq 42
ata3: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51200 irq 42
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51380 irq 42
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4f000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.5.0-19-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb4d000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.5.0-19-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb50000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.5.0-19-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4e000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.5.0-19-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:13.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb4c000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.5.0-19-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:14.5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
xhci_hcd 0000:00:10.0: irq 18, io mem 0xfeb4a000
xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:00:10.0: irq 47 for MSI/MSI-X
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.5.0-19-generic xhci_hcd
usb usb6: SerialNumber: 0000:00:10.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 7
usb usb7: New USB device found, idVendor=1d6b, idProduct=0003
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 3.5.0-19-generic xhci_hcd
usb usb7: SerialNumber: 0000:00:10.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
xhci_hcd 0000:00:10.1: irq 17, io mem 0xfeb48000
xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 49 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 51 for MSI/MSI-X
xhci_hcd 0000:00:10.1: irq 52 for MSI/MSI-X
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.5.0-19-generic xhci_hcd
usb usb8: SerialNumber: 0000:00:10.1
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:00:10.1: xHCI Host Controller
xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 9
usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.5.0-19-generic xhci_hcd
usb usb9: SerialNumber: 0000:00:10.1
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
usbcore: registered new interface driver libusual
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
ashmem: initialized
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
Magic number: 4:283:290
tty tty23: hash matches
rtc_cmos 00:05: setting system clock to 2012-11-23 17:16:14 UTC (1353690974)
powernow-k8: Found 1 AMD A10-5800K APU with Radeon(tm) HD Graphics (4 cpu cores) (version 2.20.00)
powernow-k8: Core Performance Boosting: on.
powernow-k8: 0 : pstate 0 (3800 MHz)
powernow-k8: 1 : pstate 1 (3400 MHz)
powernow-k8: 2 : pstate 2 (2900 MHz)
powernow-k8: 3 : pstate 3 (2400 MHz)
powernow-k8: 4 : pstate 4 (1900 MHz)
powernow-k8: 5 : pstate 5 (1400 MHz)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata6: SATA link down (SStatus 0 SControl 300)
usb 1-4: new high-speed USB device number 3 using ehci_hcd
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata3.00: ATAPI: PIONEER DVD-RW DVRTS08, 1.00, max UDMA/33
ata3.00: configured for UDMA/33
ata1.00: ATA-8: OCZ-VERTEX2, 1.11, max UDMA/133
ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb 1-4: New USB device found, idVendor=0cf3, idProduct=9271
usb 1-4: New USB device strings: Mfr=16, Product=32, SerialNumber=48
usb 1-4: Product: UB91
usb 1-4: Manufacturer: ATHEROS
usb 1-4: SerialNumber: 12345
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.11 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb3 < sdb5 >
sd 1:0:0:0: [sdb] Attached SCSI disk
scsi 2:0:0:0: CD-ROM PIONEER DVD-RW DVRTS08 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg2 type 5
Freeing unused kernel memory: 928k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1464k freed
Freeing unused kernel memory: 1120k freed
udevd[113]: starting version 175
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: irq 53 for MSI/MSI-X
r8169 0000:01:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000666000, d4:3d:7e:4c:a2:40, XID 0c900800 IRQ 53
r8169 0000:01:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Btrfs loaded
device fsid 332d3204-c24b-4030-9854-6e83df0e4858 devid 1 transid 13494 /dev/sda3
usb 2-4: new high-speed USB device number 3 using ehci_hcd
device fsid 4c2c1f1b-530b-402b-bf1e-96af46a65f32 devid 1 transid 85686 /dev/sdb5
usb 2-4: New USB device found, idVendor=0c45, idProduct=62e0
usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
usb 2-4: Product: USB 2.0 Camera
usb 2-4: Manufacturer: Sonix Technology Co., Ltd.
Refined TSC clocksource calibration: 3792.910 MHz.
Switching to clocksource tsc
btrfs: disk space caching is enabled
Btrfs detected SSD devices, enabling SSD mode
btrfs: disk space caching is enabled
btrfs: unlinked 3 orphans
device fsid 4c2c1f1b-530b-402b-bf1e-96af46a65f32 devid 1 transid 85686 /dev/sdb5
btrfs: use lzo compression
btrfs: disk space caching is enabled
btrfs: bdev /dev/sdb5 errs: wr 0, rd 0, flush 0, corrupt 2, gen 0
usb 4-1: new full-speed USB device number 2 using ohci_hcd
usb 4-1: New USB device found, idVendor=045e, idProduct=0719
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-1: Product: Xbox 360 Wireless Receiver for Windows
usb 4-1: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft
usb 4-1: SerialNumber: FDD336E0
usb 4-5: new full-speed USB device number 3 using ohci_hcd
usb 4-5: New USB device found, idVendor=08bb, idProduct=2704
usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-5: Product: USB Audio DAC
usb 4-5: Manufacturer: Burr-Brown from TI
usb 3-3: new full-speed USB device number 2 using ohci_hcd
usb 3-3: New USB device found, idVendor=0cf3, idProduct=3000
usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 8-2: new low-speed USB device number 2 using xhci_hcd
usb 8-2: New USB device found, idVendor=04d9, idProduct=2011
usb 8-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 8-2: Product: USB Keyboard
usb 8-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 8-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
btrfs: unlinked 6 orphans
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[580]: starting version 175
lp: driver loaded but no devices found
f71882fg: Found f71808a chip at 0x600, revision 33
f71882fg f71882fg.1536: Fan: 1 is in duty-cycle mode
f71882fg f71882fg.1536: Fan: 2 is in duty-cycle mode
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
AMD IOMMUv2 driver by Joerg Roedel
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
type=1400 audit(1353658583.483:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=668 comm="apparmor_parser"
type=1400 audit(1353658583.483:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=668 comm="apparmor_parser"
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[fglrx] Maximum main memory to use for locked dma buffers: 3263 MBytes.
[fglrx] vendor: 1002 device: 9901 count: 1
[fglrx] ioport: bar 1, base 0xf000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 9.1.11 [Oct 18 2012] with 1 minors
type=1400 audit(1353658583.583:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=849 comm="apparmor_parser"
type=1400 audit(1353658583.583:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=849 comm="apparmor_parser"
type=1400 audit(1353658583.583:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=849 comm="apparmor_parser"
type=1400 audit(1353658583.583:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=798 comm="apparmor_parser"
type=1400 audit(1353658583.583:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=798 comm="apparmor_parser"
type=1400 audit(1353658583.583:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=798 comm="apparmor_parser"
microcode: CPU0: patch_level=0x06001119
init: failsafe main process (864) killed by TERM signal
input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.0/input/input2
input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.2/input/input3
input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.4/input/input4
input: Xbox 360 Wireless Receiver as /devices/pci0000:00/0000:00:13.0/usb4/4-1/4-1:1.6/input/input5
usbcore: registered new interface driver xpad
cfg80211: Calling CRDA to update world regulatory domain
microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
microcode: CPU1: patch_level=0x06001119
Linux video capture interface: v2.00
microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
microcode: CPU2: patch_level=0x00000000
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62e0)
microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
microcode: CPU3: patch_level=0x00000000
microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
microcode: Microcode Update Driver: v2.00 , Peter Oruba
input: USB 2.0 Camera as /devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
hda-intel: Force to non-snoop mode
snd_hda_intel 0000:00:01.1: irq 54 for MSI/MSI-X
input: Burr-Brown from TI USB Audio DAC as /devices/pci0000:00/0000:00:13.0/usb4/4-5/4-5:1.2/input/input6
hid-generic 0003:08BB:2704.0001: input,hidraw0: USB HID v1.00 Device [Burr-Brown from TI USB Audio DAC ] on usb-0000:00:13.0-5/input2
input: USB Keyboard as /devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.0/input/input8
hid-generic 0003:04D9:2011.0002: input,hidraw1: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:10.1-2/input0
type=1400 audit(1353658583.759:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1107 comm="apparmor_parser"
type=1400 audit(1353658583.759:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1107 comm="apparmor_parser"
3:3:1: cannot get freq at ep 0x84
usbcore: registered new interface driver snd-usb-audio
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usb 1-4: ath9k_htc: Firmware htc_9271.fw requested
usbcore: registered new interface driver ath9k_htc
input: USB Keyboard as /devices/pci0000:00/0000:00:10.1/usb8/8-2/8-2:1.1/input/input9
hid-generic 0003:04D9:2011.0003: input,hidraw2: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:10.1-2/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
r8169 0000:01:00.0: eth1: link down
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Bridge firewalling registered
ip_tables: (C) 2000-2006 Netfilter Core Team
usb 3-3: USB disconnect, device number 2
usbcore: registered new interface driver ath3k
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
Ebtables v2.0 registered
ip6_tables: (C) 2000-2006 Netfilter Core Team
usb 1-4: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card3/input11
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card3/input12
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card3/input13
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card3/input14
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card3/input15
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011180000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
usbcore: deregistering interface driver xpad
ath9k_htc 1-4:1.0: ath9k_htc: HTC initialized with 33 credits
input: Xbox 360 Wireless Receiver as /devices/virtual/input/input16
ath9k_htc 1-4:1.0: ath9k_htc: FW Version: 1.3
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
ieee80211 phy0: Atheros AR9271 Rev:1
Registered led device: ath9k_htc-phy0
fglrx_pci 0000:00:01.0: irq 55 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1839
[fglrx] Firegl kernel thread PID: 1840
[fglrx] Firegl kernel thread PID: 1841
[fglrx] IRQ 55 Enabled
[fglrx] Gart USWC size:1068 M.
[fglrx] Gart cacheable size:423 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fca6000, size:35a000
[fglrx] Reserved FB block: Unshared offset:1ffee000, size:12000
IPv6: ADDRCONF(NETDEV_UP): wlan3: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan3: link is not ready
usb 3-3: new full-speed USB device number 3 using ohci_hcd
usb 3-3: New USB device found, idVendor=0cf3, idProduct=3005
usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usbcore: registered new interface driver btusb
3:3:1: cannot get freq at ep 0x84
3:3:1: cannot get freq at ep 0x84
wlan3: authenticate with 00:1b:8b:13:de:26
wlan3: send auth to 00:1b:8b:13:de:26 (try 1/3)
wlan3: authenticated
wlan3: associate with 00:1b:8b:13:de:26 (try 1/3)
wlan3: RX AssocResp from 00:1b:8b:13:de:26 (capab=0x411 status=0 aid=2)
wlan3: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan3: link becomes ready
3:3:1: cannot get freq at ep 0x84
3:3:1: cannot get freq at ep 0x84
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
hid-generic 0005:1532:0014.0004: unknown main item tag 0x0
input: Razer Orochi as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/bluetooth/hci0/hci0:21/input17
hid-generic 0005:1532:0014.0004: input,hidraw3: BLUETOOTH HID v5.01 Mouse [Razer Orochi] on 00:26:83:39:F8:B4